EU Market Growatt 10 Kw Hybrid Solar Photovoltaic Inverter 8kw 10kw 12kw Spe8000-12000es Solar Inverter CE Certification

• Customization: Available
• After-sales Service: Yes
• Warranty: 5 Year
• Model NO.: SPE 10000 ES
• Nature of Source Flow: Active Inverter
• Phase: Single
• Output Power: >1000W
• Certification: CE, Nrs097
• Brand: Growatt
• Type: DC/AC Inverters
• Power Source: Solar Power
• Circuit Topologies: Full-Bridge Type
• Nature of Wave String: Sine Wave Inverter
• No.of Mpp Trackers: 2
• Nominal AC Output Voltage: 230V
• AC Grid Frequency: 50/60Hz
• Type of Battery: Lithium/Lead-Acid
• Weight: 21.5kg
• Altitude: <2000m
• Cooling: DC Fan
• Communication: WiFi/4G
• Transport Package: Carton/Wooden Box
• Specification: 550*465*150mm
• Trademark: Growatt
• Origin: China
• Production Capacity: 50000PCS/Year
• Package Size: 62.50cm * 70.50cm * 26.00cm
• Package Gross Weight: 25.500kg

Product Description

SPE 8000~12000 ES Hybrid Solar Inverter Introduction

The SPE 8000~12000 ES is a high-performance hybrid solar inverter designed for residential villas and small commercial energy storage systems, covering rated power options of 8kW, 10kW and 12kW to match diversified power consumption demands.
Equipped with dual independent MPPT trackers, the device accepts a maximum PV input voltage of 550VDC, improving solar energy harvesting efficiency and bringing higher compatibility with mainstream high-voltage photovoltaic modules on the market. 

Integrated with dual AC inputs and an automatic transfer switch, it switches power sources smoothly between solar power and mains supply. Its grid-tied peak shaving function stores excess solar energy for use during expensive peak hours to lower electricity bills.
Supporting parallel connection up to 108kW total capacity, it satisfies scalable power demands. Dual AC outputs achieve intelligent load control to safeguard power supply for key electrical devices. This all-in-one unit balances daily self-consumption and emergency backup power with stable and cost-effective energy management.

Datasheet	SPE 8000 ES	SPE 10000 ES	SPE 12000 ES
Input data (DC)
Max. recommended PV power (for module STC)	10000W	12500W	15000W
Max. DC voltage	550V
Start voltage	120V
MPPT voltage range	60V-480V
No. of MPPT trackers	2
No. of PV strings per MPPT tracker	1
Max. input current per MPPT tracker	27A
Max.short-circuit current per MPP trackers	34A
Output data (AC)
AC nominal power	8000W	10000W	12000W
Max. AC apparent power	8000VA	10000VA	12000VA
Nominal AC voltage	230V
AC grid frequency	50/60Hz
Output current	34.8A	43.5A	52.2A
Adjustable power factor	0.8leading…0.8lagging
THDi	< 5%
Max. conversion efficiency (PV/AC)	96.5%
European efficiency @ vnominal (PV/AC)	95.5%
Battery data (DC)
Nominal DC voltage	48V
Max charging and discharging current	190A/200A	220A/240A	250A/280A
Type of battery	Lithium/Lead-acid
Backup power (AC)
AC nominal output power	8000W	10000W	12000W
Nominal AC output voltage	230V
Nominal AC output frequency	50/60Hz
Switch time	<20ms@Single  <30ms@Paralle
Efficiency
Peak. efficiency	96.5%
European efficiency	96.5%
General data
Dimensions (W / H / D)	550/465/150mm
Weight	21.5kg
Operating temperature range	-10°C ... +50°C
Noise emission (typical)	<75dB
Self-consumption	< 75W
Topology	Tranformerless
Cooling	DC fan
Protection degree	IP20
Relative humidity	5%~95% non-condensing
Altitude	<2000m
Communication	WiFi/4G
CE,NRS097

FAQ

Q1: What are the PV input parameters and MPPT design?
Rated AC output power is 8kW, 10kW and 12kW respectively. The inverter adopts a standard 48V battery system, compatible with lithium iron phosphate batteries, lead-acid batteries and gel batteries.

Q2: What are the PV input parameters and MPPT design?
Equipped with two independent MPPT trackers, maximum PV open-circuit voltage is 550V.

Q3: Is this an on-grid or off-grid inverter?
It is an all-in-one on-grid & off-grid hybrid inverter. It can work independently to power loads under off-grid status.

Q4: What communication interfaces does the device reserve?
Standard interfaces include WiFi, RS485, CAN port for battery communication and dry contact ports for external expansion control.

Q5: What is the conversion efficiency of this inverter?
Peak efficiency reaches 96.5%, European efficiency is 95.5%. It outputs pure sine wave AC with a maximum power factor of 1.0.